|Full Exam Name||NetApp Certified Storage Installation Engineer, ONTAP|
|Certification Name||NetApp Certified Storage Installation Engineer, ONTAP|
Get Latest and Actual NetApp Certified Storage Installation Engineer, ONTAP NS0-181 Dumps Updated-2018. By using our Actualdumps NS0-181 Dumps you can pass your NS0-181 exam in a week. We guarantee it!We make it a reality and give you Actual NS0-181 Questions in our Actual NetApp Certified Storage Installation Engineer, ONTAP NS0-181 dumps.Latest 100% Actual NetApp Certified Storage Installation Engineer, ONTAP NS0-181 Dumps at below page. You can use our NetApp Certified Storage Installation Engineer, ONTAP Dumps and pass your exam.
♥ 2018 Valid NS0-181 Dumps ♥
NS0-181 exam questions, NS0-181 PDF dumps; NS0-181 exam dumps:: NS0-181 Dumps ( Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)
Latest and Most Accurate NetApp NS0-181 Dumps:
While testing storage failover, you receive an error message indicating that you have a disk inventory mismatch.
What is a reason for the error message?
A. unsupported disks
B. cabling problems
C. Flash Cache problems
D. unowned disks
What are two supported cluster interconnect switches for the FAS8040 nodes? (Choose two.)
A. Cisco Catalyst 2960
B. Cisco NX5596
C. NetApp CN1610
D. NetApp CN1601
What happens to the NTP configuration in clustered Data ONTAP 8.3 when a node joins a cluster?
A. A node that joins a cluster has a separate NTP service.
B. A node that joins a cluster automatically adopts the NTP configuration of the cluster.
C. A node that joins a cluster must be manually configured in the NTP.
D. A node that joins a cluster must reboot before running the NTP service.
A node that joins a cluster automatically adopts the NTP configuration of the cluster.
Reference: How to configure and troubleshoot NTP on clustered Data ONTAP 8.2 and later using CLI
You are assigned to install five DS2246 with twenty-four 400 GB SSDs per shelf to a single node system.
According the NetApp, which statement is correct?
A. You cannot install five SSD shelves to one System.
B. You need at least two stacks.
C. You need at least three stacks.
D. You can put all shelves in one stack.
Up to 10 shelves are supported per stack for the DS2246, so we one stack is enough as we only have five shelves (DS2246s).
Reference: Making the Move from FC to SAS Storage
Which three types of interface groups are supported on NetApp storage systems? (Choose three.)
A. single mode
B. HA interconnect
D. static multimode
E. dynamic multimode
You can create three different types of interface groups on your storage system: single-mode, static multimode, and dynamic multimode interface groups.
Reference: Types of interface groups
You have just configured the customer’s first SVM with a LIF IP 10.0.0.10/24. The customer’s DNS IP address is 172.16.0.250 and you are unable to ping it from the NetApp storage system, but you are able to ping the gateway and everything else works.
In this scenario what is the problem?
A. You need to have the DNS server on the same subnet as the LIF IP address.
B. You need to add a static gateway to the LIFs routing group.
C. You need to have the customer check the cable.
D. You need to add an IPspace and domain broadcast to the port.
New Updated NS0-181 Exam Questions NS0-181 PDF dumps NS0-181 practice exam dumps: https://www.dumpsschool.com/NS0-181-exam-dumps.html