Cisco 640-875 SPNGN1 Brain Dumps

Cisco Exam PDF

Cisco 640-875 dumps of DumpsSchool contain valid knowledge about topics of Building Cisco Service Provider Next Generation Networks. This knowledge of 640-875 dumps enhances your skills you to attempt CCNA Service Provider Certification written exam. Get these exam dumps at low rates and pass the exam.

Try it Latest DumpsSchool 640-875 Exam dumps. Buy Full File here: https://www.dumpsschool.com/640-875-exam-dumps.html (144 As Dumps)

Download the DumpsSchool 640-875 braindumps from Google Drive: https://drive.google.com/file/d/1brgZbOszEWLKrXCO5JDwcmaujkMwpfql/view (FREE VERSION!!!)

Question No. 1

Which feature is used to protect the control plane of the router?

Answer: C

Question No. 2

Refer to the exhibit.

Which statement about this show command output is true?

Answer: D

Question No. 3

A network administrator set-up AAA on a new router. While the TACACS server was down for maintenance, the administrator was still unable to login with the backup password. Which keyword did the administrator leave off of the AAA configuration?

Answer: B

Question No. 4

Refer to the exhibit.

Given the Class C IP network of 192.168.1.0, using VLSM, which five subnets meet the requirements in the exhibit? (Choose five.)

Answer: A, B, E, F, I

Question No. 5

Which SNMPv2/SNMPv3 operation is not supported in Cisco IOS XR software?

Answer: C

Question No. 6

Which EIGRP feature in IOS, IOS-XE, and IOS-XR will prevent the EIGRP process from automatically forming a neighbor adjacency?

Answer: D

Question No. 7

This show output is from the S7 Cisco Metro Switch and the PE7 Cisco ASR 9000 Series Router. Which configuration change(s) is/are needed to bring the S7 FastEthernet 0/2 interface into the up/up state?

S7#show cdp neighbors Device ID Local Intrfce Holdtme Capability Platform Port IDPE7 Fas 0/2 163 R ASR9K Ser Gig 0/0/0/0S78 Fas 0/23 146 S I ME-3400E- Fas 0/21S8 Fas 0/21 178 S I ME-3400E- Fas 0/21 *Mar 20 21:28:02.177: %ETHCNTR-3-HALF_DUX_COLLISION_EXCEED_THRESHOLD: Collisions at FastEthernet0/2 exceed threshold. Considered as loop-back.*Mar 20 21:28:02.177: %PM-4-ERR_DISABLE: loopback error detected on Fa0/2, putting Fa0/2 in err-disable state*Mar 20 21:28:03.184: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down S7#show interface fa0/2FastEthernet0/2 is down, line protocol is down (err-disabled) Hardware is Fast Ethernet, address is e8ba.70b5.6c04 (bia e8ba.70b5.6c04) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Half-duplex, 10Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:40, output 00:00:00, output hang never Last clearing of “show interface” counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 484423 packets input, 39349929 bytes, 0 no buffer Received 484423 broadcasts (167203 multicasts) 0 runts, 0 giants, 0 throttles 1 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 167203 multicast, 0 pause input 0 input packets with dribble condition detected 972398 packets output, 128931949 bytes, 0 underruns 0 output errors, 46 collisions, 4 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out RP/0/RSP0/CPU0:PE7#show interfaces gi0/0/0/0GigabitEthernet0/0/0/0 is down, line protocol is down Interface state transitions: 4 Hardware is GigabitEthernet, address is 4055.392f.40a8 (bia 4055.392f.40a8) Internet address is 192.168.107.70/24 MTU 1514 bytes, BW 100000 Kbit (Max: 100000 Kbit) reliability 255/255, txload 0/255, rxload 0/255 Encapsulation ARPA, Full-duplex, 100Mb/s, THD, link type is force-up output flow control is off, input flow control is off loopback not set, ARP type ARPA, ARP timeout 04:00:00 Last input 00:00:00, output 00:00:35 Last clearing of “show interface” counters never 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 972551 packets input, 128953765 bytes, 729 total input drops 172486 drops for unrecognized upper-level protocol Received 0 broadcast packets, 800781 multicast packets 0 runts, 0 giants, 0 throttles, 0 parity 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 484545 packets output, 39360900 bytes, 0 total output drops Output 317283 broadcast packets, 167262 multicast packets 0 output errors, 0 underruns, 0 applique, 0 resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions

Answer: C

640-875 Dumps Google Drive: (Limited Version!!!)
https://drive.google.com/file/d/1brgZbOszEWLKrXCO5JDwcmaujkMwpfql/view

Related Certification: CCNA Service Provider dumps

Cisco 640-875 SPNGN1 Brain Dumps

Cisco Exam PDF

You do not to have to panic about the preparation of CCNA Service Provider certification written exam because DumpsSchool is offering Cisco CCNA Service Provider 640-875 SPNSN1 PDF dumps with credible knowledge of Building Cisco Service Provider Next Generation Networks topics.

Try it Latest DumpsSchool 640-875 Exam dumps. Buy Full File here: https://www.dumpsschool.com/640-875-exam-dumps.html (144 As Dumps)

Download the DumpsSchool 640-875 braindumps from Google Drive: https://drive.google.com/file/d/1brgZbOszEWLKrXCO5JDwcmaujkMwpfql/view (FREE VERSION!!!)

Question No. 1

Which component is integrated into the Cisco IPoDWDM interfaces?

Answer: B

Question No. 2

Refer to the exhibit.

Using a single Class C network of 192.168.1.0/24 and VLSM, which two options specify the number of subnets that are needed to support this network and what are the minimum sizes of the required subnets? (Choose two.)

Answer: B, G

Question No. 3

Generally, which way is the fastest to open S3 and S4 service requests to the Cisco TAC?

Answer: B

Question No. 4

This show output is from the S7 Cisco Metro Switch and the PE7 Cisco ASR 9000 Series Router. Which configuration change(s) is/are needed to bring the S7 FastEthernet 0/2 interface into the up/up state?

S7#show cdp neighbors Device ID Local Intrfce Holdtme Capability Platform Port IDPE7 Fas 0/2 163 R ASR9K Ser Gig 0/0/0/0S78 Fas 0/23 146 S I ME-3400E- Fas 0/21S8 Fas 0/21 178 S I ME-3400E- Fas 0/21 *Mar 20 21:28:02.177: %ETHCNTR-3-HALF_DUX_COLLISION_EXCEED_THRESHOLD: Collisions at FastEthernet0/2 exceed threshold. Considered as loop-back.*Mar 20 21:28:02.177: %PM-4-ERR_DISABLE: loopback error detected on Fa0/2, putting Fa0/2 in err-disable state*Mar 20 21:28:03.184: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down S7#show interface fa0/2FastEthernet0/2 is down, line protocol is down (err-disabled) Hardware is Fast Ethernet, address is e8ba.70b5.6c04 (bia e8ba.70b5.6c04) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Half-duplex, 10Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:40, output 00:00:00, output hang never Last clearing of “show interface” counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 484423 packets input, 39349929 bytes, 0 no buffer Received 484423 broadcasts (167203 multicasts) 0 runts, 0 giants, 0 throttles 1 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 167203 multicast, 0 pause input 0 input packets with dribble condition detected 972398 packets output, 128931949 bytes, 0 underruns 0 output errors, 46 collisions, 4 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out RP/0/RSP0/CPU0:PE7#show interfaces gi0/0/0/0GigabitEthernet0/0/0/0 is down, line protocol is down Interface state transitions: 4 Hardware is GigabitEthernet, address is 4055.392f.40a8 (bia 4055.392f.40a8) Internet address is 192.168.107.70/24 MTU 1514 bytes, BW 100000 Kbit (Max: 100000 Kbit) reliability 255/255, txload 0/255, rxload 0/255 Encapsulation ARPA, Full-duplex, 100Mb/s, THD, link type is force-up output flow control is off, input flow control is off loopback not set, ARP type ARPA, ARP timeout 04:00:00 Last input 00:00:00, output 00:00:35 Last clearing of “show interface” counters never 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 972551 packets input, 128953765 bytes, 729 total input drops 172486 drops for unrecognized upper-level protocol Received 0 broadcast packets, 800781 multicast packets 0 runts, 0 giants, 0 throttles, 0 parity 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 484545 packets output, 39360900 bytes, 0 total output drops Output 317283 broadcast packets, 167262 multicast packets 0 output errors, 0 underruns, 0 applique, 0 resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions

Answer: C

Question No. 5

What is the result of using the Cisco IOS copy tftp: run command?

Answer: D

Question No. 6

Currently, a Cisco IOS XR router is configured to send IP SLA probes to a network management station that is acting as the IP SLA target device. How can IP SLA measurement accuracy be improved and also provide additional statistics?

Answer: B

Question No. 7

You need to enable the “local-router” serial 0/0 connection to the “remote-router” to be authenticated using the “C!sco!23” password. The password cannot be sent in cleartext between the two routers. The “remote-router” has already been configured with all the required configurations.Which four Cisco IOS configurations are necessary? (Choose four.)

Answer: A, C, E, G

640-875 Dumps Google Drive: (Limited Version!!!)
https://drive.google.com/file/d/1brgZbOszEWLKrXCO5JDwcmaujkMwpfql/view

Related Certification: CCNA Service Provider dumps