Success in Check Point Certified Security Administrator 156-215.80 exam is 100% by preparing the up-to-date 156-215.80 exam questions and doing practice through best practice 156-215.80 exam test software. CheckPoint Check Point Certified Security Administrator R80 156-215.80 exam dumps material leads towards success by doing practice with 156-215.80 exam test software and you leave no room to miss any key aspect of the 156-215.80 exam because of the real simulation software. Before purchase of the actual CheckPoint 156-215.80 exam you can take 156-215.80 exam demo free of cost!
♥ VALID 156-215.80 Exam Questions 2018 ♥
156-215.80 exam questions, 156-215.80 PDF dumps; 156-215.80 exam dumps:: https://www.dumpsschool.com/156-215.80-exam-dumps.html (265 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)
Latest CheckPoint 156-215.80 Dumps Exam Questions and Answers:
What are the two types of address translation rules?
A. Translated packet and untranslated packet
B. Untranslated packet and manipulated packet
C. Manipulated packet and original packet
D. Original packet and translated packet
NAT Rule BaseThe NAT Rule Base has two sections that specify how the IP addresses are translated:
You are unable to login to SmartDashboard. You log into the management server and run #cpwd_admin list with the following output:
What reason could possibly BEST explain why you are unable to connect to SmartDashboard?
A. CDP is down
B. SVR is down
C. FWM is down
D. CPSM is down
Vanessa is firewall administrator in her company; her company is using Check Point firewalls on central and remote locations, which are managed centrally by R80 Security Management Server. One central location has an installed R77.30 Gateway on Open server. Remote location is using Check Point UTM-1 570 series appliance with R71. Which encryption is used in Secure Internal Communication (SIC) between central management and firewall on each location?
A. On central firewall AES128 encryption is used for SIC, on Remote firewall 3DES encryption is used for SIC.
B. On both firewalls, the same encryption is used for SIC. This is AES-GCM-256.
C. The Firewall Administrator can choose which encryption suite will be used by SIC.
D. On central firewall AES256 encryption is used for SIC, on Remote firewall AES128 encryption is used for SIC.
Gateways above R71 use AES128 for SIC. If one of the gateways is R71 or below, the gateways use 3DES.
Review the following screenshot and select the BEST answer.
A. Data Center Layer is an inline layer in the Access Control Policy.
B. By default all layers are shared with all policies.
C. If a connection is dropped in Network Layer, it will not be matched against the rules in Data Center Layer.
D. If a connection is accepted in Network-layer, it will not be matched against the rules in Data Center Layer.
Which of the following is NOT a SecureXL traffic flow?
A. Medium Path
B. Accelerated Path
C. Fast Path
D. Slow Path
SecureXL is an acceleration solution that maximizes performance of the Firewall and does not compromise security. When SecureXL is enabled on a Security Gateway, some CPU intensive operations are processed by virtualized software instead of the Firewall kernel. The Firewall can inspect and process connections more efficiently and accelerate throughput and connection rates. These are the SecureXL traffic flows:
Slow path – Packets and connections that are inspected by the Firewall and are not processed by SecureXL.
Accelerated path – Packets and connections that are offloaded to SecureXL and are not processed by the Firewall.
Medium path – Packets that require deeper inspection cannot use the accelerated path. It is not necessary for the Firewall to inspect these packets, they can be offloaded and do not use the slow path. For example, packets that are inspected by IPS cannot use the accelerated path and can be offloaded to the IPS PSL (Passive Streaming Library). SecureXL processes these packets more quickly than packets on the slow path.
Which of the following Automatically Generated Rules NAT rules have the lowest implementation priority?
A. Machine Hide NAT
B. Address Range Hide NAT
C. Network Hide NAT
D. Machine Static NAT
SmartDashboard organizes the automatic NAT rules in this order:
New Updated 156-215.80 Exam Questions 156-215.80 PDF dumps 156-215.80 practice exam dumps: https://www.dumpsschool.com/156-215.80-exam-dumps.html